Title一种镍基高温合金蠕变过程中碳、硼化物的演变行为及结构表征
Other TitlesEvolution and Structure Characterization of the Carbide and Boride during Creep in A Ni-based Superalloy
Authors都贝宁
盛立远
赖琛
崔传勇
杨金侠
孙晓峰
Affiliation北京大学
北京大学香港科技大学深圳研修院
北京大学深圳研究院
中国科学院金属研究所
Keywords镍基高温合金
蠕变
碳化物
硼化物
Ni-based superalloy
creep
carbide
boride
NICKEL-BASED SUPERALLOY
PRIMARY MC CARBIDE
TENSILE PROPERTIES
RENE 80
MICROSTRUCTURE
BEHAVIOR
PRECIPITATION
DECOMPOSITION
Issue Date2017
Publisher稀有金属材料与工程
Citation稀有金属材料与工程.2017,2123-2129.
Abstract通过对一种镍基铸造K417G高温合金进行760℃/645 MPa、900℃/315 MPa和950℃/235 MPa 3种条件下的蠕变性能测试,并采用扫描电镜、透射电镜等实验方法对蠕变后高温合金微观组织进行表征,分析不同条件下的蠕变机理,并对比分析蠕变前后合金中碳、硼化物的形态、分布、晶体结构,研究不同蠕变温度和应力条件对碳、硼化物析出和演变行为的影响,并揭示碳、硼化物对镍基高温合金不同条件下蠕变性能的影响。结果显示,K417G高温合金的蠕变寿命随着蠕变条件由760℃/645 MPa向900℃/315 MPa和950℃/235 MPa转变先升高后降低。760℃/645MPa下,蠕变裂纹产生于MC型碳化物的碎裂;900℃/315 MPa下,蠕变裂纹一部分产生于晶界,另一部分产生于MC型碳化物碎裂;950℃/235 MPa下,蠕变裂纹全部产生于晶界。在760℃/645 MPa下,MC型碳化物不分解,晶界没有析出细小碳、硼化物;900℃/315 MPa下,MC型碳化物分解产生M23C6型碳化物,晶界析出细小均匀分布的M23C6型碳化物和M3B2型硼化物;950℃/235 MPa下,晶界M23C6型碳化物和M3B2型
The creep property of a Ni-based K417G superalloy was tested at 760 degrees C/645 MPa, 900 degrees C/315 MPa and 950 degrees C/235 MPa, and then the microstructure after creep was characterized through scanning electron microscope (SEM) and transmission electron microscope (TEM). The creep mechanism under different conditions was analyzed. Moreover, by comparing the morphology, distribution and crystal structure of carbides and borides before and after creep tests, the influences of creep condition on the precipitation and evolution of carbides and borides were investigated, and the effects of carbides and borides on the creep properties of Ni-based superalloy were revealed. Results show that as the creep condition varies from 760 degrees C/645 MPa to 900 degrees C/315 MPa and 950 degrees C/235 MPa, the creep life of K417G superalloy increases firstly and then decreases. At 760 degrees C/645 MPa, the creep crack initiates at the broken MC carbide; At 900 degrees C/315 MPa, the creep crack initiates at both the broken MC carbide and grain boundary; At 950 degrees C/235 MPa, the creep crack initiates at grain boundary. In addition, at 760 degrees C/645 MPa, the MC carbide does not decompose, and there is no carbide or boride precipitate at the grain boundary; At 900 degrees C/315 MPa, the MC carbide decomposes and M23C6 carbide forms. M23C6 carbide and M3B2 boride precipitate uniformly at the grain boundary; At 950 degrees C/235 MPa, the M23C6 carbide and M3B2 boride at the grain boundary grow up and distribute as strip.
URIhttp://hdl.handle.net/20.500.11897/464214
ISSN1002-185X
IndexedSCI(E)
Appears in Collections:深圳研究生院待认领

Files in This Work
There are no files associated with this item.

Web of Science®



Checked on Last Week

百度学术™



Checked on Current Time




License: See PKU IR operational policies.